On 13th and 14th September, VolmeGraphics will celebrate its 20th anniversary with its fifth User Group Meeting. The XRAY-LAB is very proud to present a current machine construction project as one of five partners in the Heidelberger Druckakademie. Using an XRAY-LAB Inline CT system the entire production of this part can be tested. Up to 3,600 components per hour are automatically analyzed for shape tolerance and porosity. Since the analysis is almost real-time, not only can the bad parts can separated a few seconds after the analysis, but also production-relevant basic data are available according to Industry 4.0 standrads . In this way, defective toolings or changing parameters of production systems can be detected very quickly.
You might also like
10. September 2019 at the Battery Show in Novi, MIhttps://i0.wp.com/xray-lab.com/wp-content/uploads/2019/09/Web_003.jpg?fit=1024%2C768&ssl=1 1024 768 XRAY-LAB | Industrial X-ray analysis & 3D computed tomography (CT) XRAY-LAB | Industrial X-ray analysis & 3D computed tomography (CT) https://i0.wp.com/xray-lab.com/wp-content/uploads/2019/09/Web_003.jpg?fit=1024%2C768&ssl=1